news ch

10.4" CCTV LED Backlight Monitor ‧ HS-ML1040 / HS-ML1040 with RS485 (optional)

Professional LED Backlight Monitor for surveillance.

Front plastic / back metal case.

Video input BNC x 2 / VGA x 1 / S-Video x 1(w/o RS485).

Video output BNC x 2.

Audio Input phone jack x 2.

Audio speaker x 2.

Compatible with VGA(640X480).

Full / Under / Over scale mode.

Picture-In-Picture feature that allow multi-picture display.

High brightness level and contrast ratio with viewing super

wide angle.

このメールアドレスはスパムボットから保護されています。閲覧するにはJavaScriptを有効にする必要があります。  

Dimension

Specifications

Model

HS-ML1040

Button Control

Power / OSD Control / Source

Display Resolution

800(W) x 600(H)

Active Area

211.2(H) x 158.4(V)mm

Dot Pitch

0.264 (H) x 0.264(V)mm

Display Ratio

4:3

Brightness (Central)

300cd/m2 (*1)

Contrast Ratio

500 :1

Viewing Angle

Left 75° / Right 75° / Up 50° / Down 60° CR>10

Response Time

30ms

Input Voltage

DC12V

Input Signal

1Vp-p composite video

Input Impedance

75 ohm

Output Impedance

75 ohm (Auto Termination)

Scanning System

NTSC: 525 lines, 60 fields / sec ; PAL: 625 lines, 50 fields / sec

VGA Input

15 pin D-SUB connector x 1

Video Input/ Output

BNC x 2 / BNC x 2 Looping Output Auto Termination

Audio Input(L/R)

3.5mm Phone Jack x 2

RS485

optional

RS485 jack

Pin jack x 2, +/-(w/o S-Video)

Protocol

Pelco P / Pelco D / customized protocol

Control device

operate PTZ dome or camera / DVR and monitor group management by remote controller

Control ID

PTZ dome or camera 1 ~ 255 /  DVR 1 ~ 255 / Monitor 1~255

DC power out

Pin jack x 2, 5V / 500mA / GND

S-Video

4-pin DIN connector x 1(w/o RS485)

Speaker

1W + 1W

Power Consumption

11W

Operating Temperature

-10 ~ 50 (14~ 122)

Storage Temperature

-20 ~ 60 (-4 ~ 140)

Dimension

261(W) x 223(H) x 42(D)mm

Weight

N.W./ G.W.: 1.7kg / 2.9kg